Rcexl Servo Tester Simulator Aerial Model Tools 4.8~8.4V Tester



Availability: In stock, Processing Time 3-4 Work Days.

RCD3007 Universal Remote Controlled Nitro Engine Glow Plug Driver CDI Ignition 4.5~16V for RC Airplane Helicopter

Product Description

Rcexl Servo Tester / Simulator will allow you to test your servos without the need of a radio/receiver.

Voltage: 4.8~8.4V
Weight: 27g/0.9oz
Dimensions: 66*36*22mm

How to use:
1. Press the “Set” switch to put the device in AUTO or Manual mode.
After battery and 1 to 3 servo connected to the device you decide the mode you will like to use.
2. In Auto mode function the GREEN LED will lit; device will generate automatically full range pulse and servo/s will start to swipe from full CW to CCW continuous, the digital display will show the numbers going from one end of the spectrum to the other.
3. In Manual mode the RED LED will lit; device will allow you to move the servo to your desired position by rotating the round knob, display will indicate the pulse width at that position.

Rcexl Servo Tester

Additional Information

Name Rcexl Servo Tester Simulator Aerial Model Tools 4.8~8.4V Tester
SKU Rcexl2212
Weight(KG) 0.2000
Free Shipping No
Color No

Shipping & Payment

Payment Methods:

  • PayPal
  • Western Union
  • Wire Transfer Bank

 More detail 

How Long Will It Take To Deliver?

The total delivery time is separated into two parts, the processing time and the shipping time.
The processing time is the time from when your payment is received to when we gather all the items and package them,
which takes approximately 3 to 5 working days.
The shipping time is the time it takes for the package to be delivered by the couriers to the final destination.

  • Standard shipping time takes approximately 6 to 15 working days
  • Expedited shipping time takes approximately 4 to 10 working days.
  • If free shipping products, it will cost about 6 to 15 days.


We are not by ePacket,Post Air Parcel.

Product Tags

Add your tags

Use spaces to separate tags. Use single quotes (') for phrases.