- Using STM32F103RC at 72MHz processor, the speed is 10 times faster than 8-bit processor’s, and it responses faster and more sensitive.
- Can be remounted onboard Bluetooth and tuned PID parameters through mobile phones.
- Onboard gyro and acceleration sensor(MPU6050)
- Storm Arm 32-bit accurate algorithm, maximum jitter angle is less than 1 degree(alexmos 8-bit is 3 degrees)
- The sampling frequency of gyroscope is up to 700MHz(The sampling frequency of alexmos 8-bit is only 200MHz)
- IR LED interface
- Futaba S-BUS, support BUS receiver: Spektrum satellite port
- 7CH PWM/Sum-PPM input/output
- Each axle could connect analog joystick
- With I2C port, could use external 6050 to replace onboard snsor
- 3*AUX ports
- Gyroscope IMU wire cable has been replaced for softer silicone cable
- Vertical & horizontal needle will be sent randomly.
- Processor: STM32F103RC at 72MHz
- Motor Driver: DRV8313(with short circuit, overheat protection)
- Power Supply: 9-25V or 3-6S LiPo
- Drive Current: Max. 1.5A, fully support 5-8in high power motors
- Dimensions: 50*50mm, Φ3mm screw hole, 45mm pitch
- 1 x Storm32 3-Axle Gimbal Controller DRV8313 Driver
- 2 x Sensors
- 2 x Cables
The brushless gimbal controller is still the open source model, it requires certain English foundation and practical ability. Our shop does not provide one-to-one technical support please buy cautiously!
The brushless gimbal controller adopts high frequency DC-DC switch design(high voltage up to 5V), which enhance the stability of the circuit and reduce the power consumption, you can refer to the step-down design of alexmos 32-bit controller. However, some merchants of Taobao uses single antihypertensive chip in order to save costs. Hope the players can identify the castration version and refuse it.
|Name||Storm32 BGC 32Bit 3-Axle Brushless Gimbal Controller V1.31 DRV8313 Motor Driver with 2 External Sensors|
Shipping & Payment
- Western Union
- Wire Transfer Bank
How Long Will It Take To Deliver?
The total delivery time is separated into two parts, the processing time and the shipping time.
The processing time is the time from when your payment is received to when we gather all the items and package them,
which takes approximately 3 to 5 working days.
The shipping time is the time it takes for the package to be delivered by the couriers to the final destination.
- Standard shipping time takes approximately 6 to 15 working days
- Expedited shipping time takes approximately 4 to 10 working days.
- If free shipping products, it will cost about 6 to 15 days.
All Ship Method choose:EMS,DHL,FEDEX,UPS,TNT,ARAMEX,TOLL,DPEX.
We are not by ePacket,Post Air Parcel.