Mini Pixracer Autopilot Xracer Pixhawk FMU V4 Flight Controller for FPV Quadcopter

SKU:HM-0032

$71.00

Availability: In stock, Processing Time 3-4 Work Days.

* Required Fields

RCD3007 Universal Remote Controlled Nitro Engine Glow Plug Driver CDI Ignition 4.5~16V for RC Airplane Helicopter

Product Description

Description:

The new Pixracer (formerly called XRacer) is available now and its fully supported by the Arducopter and PX4 community. Its a genuine open source project, already running with PX 4 stack software / QGroundControl (QGC), as well with Arducopter / Mission Planner (MP).

This is not just another small Pixhawk knock off or derivate, the Pixracer is the first autopilot of the new FMUv4 Pixhawk generation. Its coming with an upgraded Invensense Sensor generation (bye bye tricky LSM 303), a plug in Wifi board and last not least with a 2MB Flash : A real upgrade compared to former versions.

Specifications:

•PCB dimension: 36mm*36mm
•FRAM - FM25V02-G
•LDO Ultra low noise LDOs for sensors and FMU
•MPU9250 , ICM20608 , baro MS5611, mag HMC5983
•Connectors - GPS+I2C, RC-IN, PPM-IN, RSSI, SBus-IN, Spektrum-IN, USART3 ( TxD, RxD, CTS, RTS ), USART2 ( TxD, RxD, CTS, RTS ), FRSky-IN, - FRSky-OUT, CAN, USART8 ( TxD, RxD ), ESP8266 ( full set ), SERVO1-SERVO6, USART7 ( TxD, RxD ), JTAG ( SWDIO, SWCLK ), POWER-BRICK ( - VDD, Voltage, Current, GND ), BUZZER-LED_BUTTON
•MicroSD card reader
•RGB LED
•Micro USB
•WiFi ESP8266 802.11bgn ( Included !) .
•JST GH series connectors for easy and robust peripheral connections, DF13 haters will love those !
•Dimensions - 36 x 36mm with 30.5 x 30.5mm hole grid with 3.2mm holes
•Weight Pixracer - ( include SD and CNC protective case ) 26g
•5 kinds of professional flexible silicone cables for almost any peripheral module included.
•Power supply - 5-5.5VDC from USB or Power Brick connector.

Includes:

•1 * Pixracer V1.0 Flight Controller
•1 * CNC Case
•1 * Safety switch + buzzer
•1 * Power Module Cable
•1 * Serial Cable
•1 * I2C Cable
•1 * Receiver Cable
•1 * WiFi ESP8266 Module
•1 * Micro SD Card & Reader

Pixracer V1.0 Flight Controller

Pixracer V1.0 Flight Controller

Pixracer V1.0 Flight Controller

Pixracer V1.0 Flight Controller

Pixracer V1.0 Flight Controller

Pixracer V1.0 Flight Controller

Pixracer V1.0 Flight Controller

Pixracer V1.0 Flight Controller

Pixracer V1.0 Flight Controller

Pixracer V1.0 Flight Controller

Pixracer V1.0 Flight Controller

Pixracer V1.0 Flight Controller

Pixracer V1.0 Flight Controller

Pixracer V1.0 Flight Controller

Pixracer V1.0 Flight Controller

Additional Information

Name Mini Pixracer Autopilot Xracer Pixhawk FMU V4 Flight Controller for FPV Quadcopter
SKU HM-0032
Weight(KG) 0.5000
Free Shipping No
Brand No
Color No

Shipping & Payment

Payment Methods:

  • PayPal
  • Western Union
  • Wire Transfer Bank

 More detail 

How Long Will It Take To Deliver?

The total delivery time is separated into two parts, the processing time and the shipping time.
The processing time is the time from when your payment is received to when we gather all the items and package them,
which takes approximately 3 to 5 working days.
The shipping time is the time it takes for the package to be delivered by the couriers to the final destination.

  • Standard shipping time takes approximately 6 to 15 working days
  • Expedited shipping time takes approximately 4 to 10 working days.
  • If free shipping products, it will cost about 6 to 15 days.

All Ship Method choose:EMS,DHL,FEDEX,UPS,TNT,ARAMEX,TOLL,DPEX.

We are not by ePacket,Post Air Parcel.

Ratings & Reviews

5
1review
5 star
1
4 star
0
3 star
0
2 star
0
1 star
0
Add your review
Most Helpful Customer Reviews
  • 0 of 0 people found the following review helpful

    very thanks

    Delivery 6 days after we received, very fast,

    By on

    Comment
    Was this review helpful to you?

Product Tags

Add your tags

Use spaces to separate tags. Use single quotes (') for phrases.