Emax Program Card Programer for Simon / Blheil / Nano / 4in1 ESC

SKU:14130-875

$11.78

Availability: Out of stock

RCD3007 Universal Remote Controlled Nitro Engine Glow Plug Driver CDI Ignition 4.5~16V for RC Airplane Helicopter

Product Description

Original Emax Program Card Programer for Simon / Blheil / Nano / 4in1 ESC

 

Some motor rotating in the wrong direction? The motor should spin clockwise but it clearly is spinning ccw which cause the drone could not lift off the ground? The ESC work in the wrong way? Let's re-programming the ESC.

 

 

Compatible Model:

Emax SimonK Series Brushless ESC

  (Simonk 6A 12A 20A 25A 30A 30A_OPTO 40A 60A ESC and 4in1 20A 25A ESC)

 

Emax BLHeli Series Brushless ESC

  (6A 12A 20A 25A 30A 30A_OPTO 40A 50A 60A 80A ESC)

 

Emax NANO Series Brushless ESC

  (6A 12A 20A ESC)

 

Emax 4in1 Brushless 20A 25A ESC

 

 

Description:

Original Emax Program Card Programer

Brand new & superior quality

Size: 88*56*14mm

Weight: 45g

 

 

User Instruction of Emax Program card for Simon and BLHeli and NANO series ESC
(This program card is compatible with Simon and BLHeli and NANO series ESC)

 

Programming the ESC:
1. Disconnect the ESc from the battery
2. Pull the PPM signal wire into the program card jack. Please pay attention to the direction. (for 4in1 ESC, please refer to the user instruction for 4in1 ESC)
3. Connect the ESC to the battery, the motor will give a ♪2 3 1 tune within 5 seconds, and the LED on the program card will display as no1.1.
4. The program card automatically reads parameters from the ESM, when different parameters are chosen, the LED will display the value for the parameter.
5. All the parameters values can be viewed, modified, and written by pressing corresponding buttons.
6. Disconnect the ESC from the battery.

 

Functions of each Button:
ITEM: to choose different parameters.
OPTION: to choose different values of the parameters
WRITE: to write the parameter values (press and release at once); or to restore factory defaults (by pressing the button and hold for more than 3 seconds.)

 

Press the "ITEM" button to choose different parameters, (The 3-digit LED will display the corresponding parameter bumber whten they are chosen.), then press the "OPTION" button to choose different values of parameters (the 1-digit LED will display the parameter value), and press "WRITE" button to write the parameter values into the ESC (press and let go at once, all the LEDs will flash three times), or to restore factory defaults by pressing the button and hold for more than 3 seconds (all the LEDs will flash until the button is released).


You can also modify all the values one after another and press the "WRITE" button to write all the modifications at once.

 

Programmable parameters:
1. Brake Type: There are 2 options, OFF/ON.
 The default is OFF.

 (Note: This parameter is invalid in boat ESC because there is no brake in this type of ESCs)
2.Timing Mode: There are 5 options, Low 0°, Mid-Low 8°, Middle 15°, Mid-High 23°, High 30°.

 The default is Middle 15°.
3. Start Force: There are 13 options, 0.031 0.047 0.063 0.094 0.125 0.188 0.25 0.38 0.50 0.75 1.00 1.25 1.50.

 The default is 0.75.
4. Curve Mode: There are 4 options, OFF/Low/Middle/High.

 The default is OFF.
5. Control Frequency: There are 2 options, 8KHz and 22KHz.

 The default is 8KHz.
6. Low-voltage Protection: There are 4 options, OFF, 2.8V/Cell, 3.0V/Cell, 3.2V/Cell.

 The default is 3.0V/Cell.
7. Cutoff Mode: There are 2 options, Soft-Cut and Cut-Off.

 The default is Soft-Cut.
 (Note: This parameter is invalid in boat ESC because there is no Cutoff in the boat ESC)
8. Rotation Ditection: There are 3 options, Normal/Reverse/Bidirectional.

 The default is Normal.

 

 

Package Content:

1x Emax ESC Program Card

Additional Information

Name Emax Program Card Programer for Simon / Blheil / Nano / 4in1 ESC
SKU 14130-875
Weight(KG) 0.6000
Free Shipping No
Brand Emax
Color No

Shipping & Payment

Payment Methods:

  • PayPal
  • Western Union
  • Wire Transfer Bank

 More detail 

How Long Will It Take To Deliver?

The total delivery time is separated into two parts, the processing time and the shipping time.
The processing time is the time from when your payment is received to when we gather all the items and package them,
which takes approximately 3 to 5 working days.
The shipping time is the time it takes for the package to be delivered by the couriers to the final destination.

  • Standard shipping time takes approximately 6 to 15 working days
  • Expedited shipping time takes approximately 4 to 10 working days.
  • If free shipping products, it will cost about 6 to 15 days.

All Ship Method choose:EMS,DHL,FEDEX,UPS,TNT,ARAMEX,TOLL,DPEX.

We are not by ePacket,Post Air Parcel.

Product Tags

Add your tags

Use spaces to separate tags. Use single quotes (') for phrases.